Skip to main navigation Skip to search Skip to main content

Endpoint Detection Using OES in Via SiC / GaN Fabrication

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

GaN-on-SiC technology backside processes is challenging due to SiC etching and process integration. SiC via etch processing is typically done in ICP-RIE tools using Ni or ITO mask with SF6/ O2 /Ar gas mixture to achieve higher etch rate. Typically, the SiC via etch process is done in 75 - 100 um SiC thickness. The OES end point detection being used in GaAs and Si technologies improves via yield and increases process capacity. SiC etching is based on time dependence trying to stop on the GaN layer. The OES technique usually depends on the ability of monitoring byproducts of the etch process to achieve endpoint. The main critical parameter is signal / noise ratio and it is related to hardware, minimum open area to be etched and etching algorithm. This work demonstrates etching SiC with high repeatability and precision stopping on the GaN layer, using optical emission spectroscopy (OES) endpoint detection.

Original languageEnglish
Title of host publicationCS MANTECH 2021 - 2021 International Conference on Compound Semiconductor Manufacturing Technology, Digest of Papers
PublisherCS Mantech
Pages107-109
Number of pages3
ISBN (Electronic)9781893580312
StatePublished - 2021
Externally publishedYes
Event35th Annual International Conference on Compound Semiconductor Manufacturing Technology, CS MANTECH 2021 - Orlando, Virtual, United States
Duration: 24 May 2021 → 27 May 2021

Publication series

NameCS MANTECH 2021 - 2021 International Conference on Compound Semiconductor Manufacturing Technology, Digest of Papers

Conference

Conference35th Annual International Conference on Compound Semiconductor Manufacturing Technology, CS MANTECH 2021
Country/TerritoryUnited States
CityOrlando, Virtual
Period24/05/21 → 27/05/21

Bibliographical note

Publisher Copyright:
© 2021 CS MANTECH 2021 - 2021 International Conference on Compound Semiconductor Manufacturing Technology, Digest of Papers. All Rights Reserved.

Keywords

  • Ar
  • Endpoint
  • High Density Plasma
  • O2
  • OES (Optical Emission Spectroscopy)
  • SF6

ASJC Scopus subject areas

  • Hardware and Architecture
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Endpoint Detection Using OES in Via SiC / GaN Fabrication'. Together they form a unique fingerprint.

Cite this